|
Produkte ... Speaker Management ... Cleo Mk2 |
 |
|
| Inputs |
Two |
| Input Impedance |
10k Ohm electronically balanced |
| Maximum Input level |
+20dBu |
| Input Gain |
±15db variable in 0.1dB steps |
| CMRR |
Better than 50dB (30Hz-20kHz) |
| Input Connector |
XLR-3F or equivalent |
| Input Sample Rate |
44.1, 48, 88.2, 96kHz |
| Output Impedance |
<50 Ohms electronically balanced |
| Maximum Ouput Level |
+20dB into 600 Ohms or greater |
| Gain |
±21dB, variable in 0.1dB steps |
| Output Connector |
XLR-3F or equivalent transformer balancing option |
| Crossover Filters - Slopes |
6, 12, 18, 24, or 48dB per octave (filter type dependant) |
| Crossover Filters - Type |
Bessel, Butterworth or Linkwitz-Riley |
| Delays available on Inputs A, B and Outputs 1, 2, 3, 4, 5, 6 |
| Delay Step |
11 microseconds minimum |
| Max Delay Time |
2.6 seconds |
| Max number of EQ Filters |
60 (depending on crossover slopes) |
| EQ Gain |
±15db variable in 0.2dB steps |
| EQ type |
Parametric, Bell or Shelving on any Filter. Nine Filters assigned to Dynamic EQ |
| Q (bandwidth) |
0.05 to 3 octaves, variable in 0.05 steps |
| EQ Frequency |
15Hz to 20kHz |
| Dynamic Slope |
2:1 to 20:1 (dynamic EQ`s only) |
| General Performance with Filters Out |
| Frequency Response |
15Hz-20kHz, ±0.25kB 15Hz \ -40kHz, ±3dB |
| DynamicRange |
>112dB unweighted 22Hz to 22kHz, >117dB on AES/EBU input |
| Channel Separation |
>80dB, 30Hz to 20kHz |
| Distortion (THD) |
<0.005%, 20Hz-20kHz@ +10dBu Output |
| Input Metering |
-20dB, -12dB, -6dB, -3dB, Clip relative to Clip point (+20dBu) |
| Output Meter Indication |
SIG (-40dB), -20dB, -12dB, -6dB, -3dB, 0dB, Over (+6dB) relative to limiter threshold setting |
| Mains Power |
110V - 240V AC. 50/60Hz, 30VA |
| Dimensions (mm) |
44 x 481 x 223 (H x W x D) |
| Weight (kgs) |
3.6 |
|
|
Produkte 
